technical data sheet 1/3 straight plug solder type r112.053.000 cable .085 series : smc issue : 0040 n in the effort to improve our products, we reserve the right to make changes judged to be necessary. all dimensions are in mm. .. pn ao components body center contact outer contact insulator gasket others parts - - materials brass beryllium copper - ptfe - brass - - platings ( m) gold 0.2 over nickel 2 gold 1.3 over nickel 2 - gold 0.2 over nickel 2 - -
technical data sheet 2/3 straight plug solder type r112.053.000 cable .085 series : smc issue : 0040 n in the effort to improve our products, we reserve the right to make changes judged to be necessary. packaging standard unit o ther 100 ?w? option contact us electrical characteristics impedance 50 ? frequency 0-10 ghz vswr 1.10 + 0.025 x f(ghz) maxi insertion loss 0.125 f(ghz) db maxi rf leakage - ( 62 - f(ghz)) db mini voltage rating 250 veff maxi dielectric withstanding voltage 750 veff mini insulation resistance 1000 m ? mini mechanical characteristics center contact retention axial force ? mating end na nmini axial force ? opposite end na nmini torque na n.cm mini recommended torque mating 30 n.cm panel nut na n.cm clamp nut na n.cm a/f clamp nut 0.000 mm mating life 500 cycles mini weight 3.000 g environmental operating temperature -65/+105 c hermetic seal na atm.cm3/s panel leakage na specification cable assembly stripping abcdef m m 3.00 1.00 0.00 0.00 0.00 0.00 assembly instruction : recommended cable(s) rg 405 ks 1 cable retention - pull off 200 nmini - torque na n.cm tooling part number description hexagon .. . others characteristics -
technical data sheet 3/3 straight plug solder type r112.053.000 cable .085 series : smc issue : 0040 n in the effort to improve our products, we reserve the right to make changes judged to be necessary. components stripping dimensions center contact body 1 2 -strip off the outer conductor and the dielectric -solder the contact -put the assembly into the body. -solder the body on the semi-rigid cable. soldering area n ote : in order to ensure correct positioning of the contact it is recommended that a receptacle is fitted to the plug prior to soldering the body.
|
